We offer LED truck tail lights, LED turn signal lights, marker lights and just about any other LED light for your trailer. Check out the assortment of grommets and plugs that fit your light too. We add many of the top manufacturer’s newest lights all the time, so check back for the latest in LED lights every week.
This LED truck tail light is used for stop / tail / turn / backup and comes with 16 red LEDs and 22 white LEDs (no side markers). These LED truck backup lights have extremely bright diodes and have three threaded studs with nuts mounted in…
4-inch tail lights/ turn signals
These 4" lights fit the standard grommet for truck tail lights. We have the Red, stop/ tail/ turn signal light with 10 bright LEDs and we have the Amber turn signal/ marker light with 10 LEDs. …
6.5" Oval LED lights
Some manufacturers call this a 6-inch light. This light fits the standard OEM oval tail light grommet on most vehicles. These lights come in Red or Amber and both lights have a "high" or "low" function with…
6-1/2" RED Stop/ Tail/ Turn LED
Surface mount Red LED light with reflective bezel included. This Optronics® LED tail light is SAE and DOT approved. We are running a special buy on this combo right now. You get…
Mirror finish LED tail lights
These 4" LED tail lights are for any standard grommet mount truck or trailer. These LED lights have 24 bright LEDs and inside the lens is a chrome/ mirror finish for a "high end" look. Instead of a…
ON SALE 10-pack only
4" RED Stop/ Tail/ Turn LED light with chrome bezel, surface mount. We are running a sale on this light and you have to buy 10 pack quantities. We have this light listed at $13.95 for a single light, but we…
RED Identification light
This standard 3 light setup is surface mounted and 17" long. 16-inch hole centers. Each LED light has 3 diodes for a bright trouble free ID light. 2 wire pigtail has a ground wire with ground ring…
Rectangular LED marker light
These surface mount lights are DOT approved, and SAE P2 rated. 2-1/8" x 6-7/8" with 4-3/4" hole centers for surface mounting. ( screws not included ). Built in reflex in the lens and 8 bright LEDs…
Narrow LED marker lights
These LED marker lights come in Red or Amber. 4-inches long and very narrow for surface mounting with 2 screws (not provided). Only 3/4" wide and a "bowed" lens so you can see the light from the sides. …
Amber 16-diode LED light
This is a really nice looking Amber LED light with a mirrored finish on the inside reflector. The light has a clear lens so that the light looks clear when turned off, but as you can see in the picture it…
LED Auxiliary Lights with 3D Illusion
Peterson has come out with the ultimate accessory for trucks or trailers. Chrome Stealth look when off and stunning 3D tunnel effect when on. Illuminate stainless air cleaners, headache racks, bumpers,…
6-1/2" oval turn signal / sidemarker
Amber oval light with 18 bright LEDs. As you can see from the pictures, this LED light is designed to be seen from the side of a trailer with the bubble in the lens. Fits in standard…
LED Utility light
This 15" long light strip is sealed and is 1" wide and 1-1/4"high. 8 LED diodes make this perfect for an interior light, or tool box light or utility light of any kind. All you need is 2 screws to mount…
LED Accent light/ Dome light
8 diodes, and surface mount with built in on/off switch. Great for truck cap dome lights or dome lights in any vehicle. Only 4" diameter. Very low amp draw. We are running a special on…
10-pack of white grommets that fit a 2.5" Light
This white grommet is a close out, we have 1000 left. Excellent rubber grommet that fits all 2-1/2" lights for a truck body. Not a lot of people like the white grommet, but for 20…
18-inch LED tail light w/ chrome bezel
Attractive sculpted chrome bezel on this Stop/ Tail/ Turn signal light. Red light is 17-7/8" long and has 17-1/8" between hole centers. This is a surface mount light with 9 bright LEDs. …
LED oval stop/ tail/ turn signal lights
Red 6-1/2" oval LED S/T/T light is 6.5"x 2.25". This standard size will fit in most 6.5" rubber grommets. This light has 20 LED diodes and a standard 3 pin connection.
Amber…
Amber & Red 2" lights
These lights will fit a standard 2" rubber grommet on most trucks
2" Amber LED light, standard 2 wire connection for use as a marker light. 10 LED diodes
2" Red LED light, standard 2 wire…
Amber & Red 4" Tail lights
Tow Mart 4" Red and Amber LED tail lights will fit a standard 4" tail light rubber grommet on most trucks.
Our Red 4" light has 18 LED diodes, and accepts a standard 3 pin connector. This…
LED Marker lights 2-inch flange mount
2" LED lights with polycarbonate lens, SAE coding P2
10 LEDs per light. Used for side marker/ clearance/ DOT light.
Includes 2 wire pigtail for easy wiring
1 Inch Mini Marker Lights
We offer LED mini marker lights complete with grommets. 12 volts and fits into a ¾” hole. Just drill a hole anywhere on your truck or car body and pop this LED marker light with grommet into the…
Armored lights are LED lights that are protected with a steel guard built into the light. Our red or amber LED lights are a one piece 3-diode LED marker light that is molded into a protective steel mount. These LED emergency…
LED 2-1/2" marker lights, Amber & Red
These marker lights will fit a standard 2.5" rubber grommet on most trucks.
Amber 2-1/2" light has 13 bright LED diodes and uses a standard 2 wire connector for use as a marker light.…
These LED lights (perfect for truck fenders) are pedestal mounted, with one stud or two. Our LED pedestal lights are red on one side and amber on the other side, with amber LED side marker lights.
The pedestal lights have 25…
Amber, Red & White surface mounted, LED lights with a chrome base
We offer this light in Amber, Red or white. They are ear mounted chrome bases that are 3-1/8" long. The hole centers for mounting are 2-3/4" from center hole…
LED Trailer Marker Lights
We offer individual LED marker lights for trailers. The red, amber, and red / amber trailer towing lights are for use in a bracket on the fenders of your truck. These are the most common applications,…
Our LED towing lights for trailers have a 2-7/8"x 2-1/8" marker light with a threaded single stud for mounting in the frame of a trailer. These LED stud mount lights are easy to use – just drill a hole to mount the stud and use…
Tow Mart's 2-inch & 2.5-inch grommets are for use with 2-inch & 2.5-inch lights. These are standard size rubber grommets that are used for all 2" and 2.5" marker lights.
Oval Clearance / Marker LED Lights with Chrome Bezel
Take a look at these attractive oval marker lights in amber or red. Each light is 6-1/2" long and 2-1/4" wide in the center of the light. The mounting holes are 4-3/4" from center to…
LED 4-inch round backup lights
We offer a 4" round 10 diode LED light and a high powered 54 diode LED light. Both are 4" round that fit into a standard rubber grommet on your truck.
Tow Mart's 4-inch and 6.5-inch rubber grommets are the standard size used to mount 4 and 6.5 inch tail lights. Perfect for mounting tail lights in truck bodies or in bumpers with cut-outs.
Tow Mart 2-pin and 3-pin plugs are the standard plugs for most Tail Lights, Turn Signal lights, and 2 pin marker lights. These plugs will fit all of our LED lights.
LED 1157 Replacement Bulbs
We offer 3 different LED bulbs that fit your original 1157 socket. These replacement bulbs are an excellent choice for upgrading your lights to LED in your car or truck. All LED bulbs are red and…
These lights are high quality Rapier style 15 inch stop / tail / turn LED lights for trailers. These LED tail lights feature the following:
* Surface Mounted
* 15"x1.25"x.5"
* 12vdc
* 300mA
* Sealed Polycarbonate Automotive…
6.5" LED Clear/White Oval backup light
Both lights are 6-1/2" standard size. One is a 10 diode LED grommet mount LED that will replace your existing incandescent backup light. The other is a 10 diode surface mount LED…
9-diode LED interior light w/ switch
NEW 9 diodes with more power and more light.
Flush mount light, 7.28"x 4.33"x 1.78". Features a switch for on/off and 2 wire hookup for 12v. Very low amp draw, perfect for Truck cab,…
LED Tail light & Turn signal
This is one of the newer LED tail lights for truck and trailer that dresses up a vehicle. Lights look clear when turned off but when using tail lights or turn signals or brakes, they light…
Round Tunnel Light with 3-D Illusion
This is a new item - Peterson LED tunnel light, with a two inch round light in red or amber, the ultimate accessory for trucks and trailers. This LED tunnel lighting has a two inch diameter…
LED trailer lights (set)
These lights come as a pair, you get 2 lights. Each light has 15 superflux LED diodes and the left light has LED license lights. Polypropylene housing and acrylic lens. These lights are…
LED 4"x 2" Marker Lights
We offer red or amber LED marker lights with a remarkable 16 diodes per light! These are sealed LED lights with built in 2 wire pigtail. The mounting holes are 3" apart. Also available is the chrome metal guard.…
Stop / Tail / Turn – 15 Inch Bar Lamp
These LED light bars come with 15 LED diodes in an impact resistant housing unit with built in reflex in the lens. Equipped with 14-3/16" mounting hole centers – you can mount on any…
LED Multi-Function Smart Lamps
Integrate smart lamp strobes into your vehicle by replacing your existing turn signal lights with these LED smart lamps and they will perform both functions automatically!
These LED…
This license plate light features two long lasting LED lights that are encased in a durable, sealed housing that comes in your choice of either chrome or black. They mount using a standard two stud mounting bracket with gasket and hook up…
4" LED Pedestal lights with single stud mounting
We offer these die cast chrome LED lights in Amber/ Amber, Red/ Amber or Red/ White. These lights have 34 bright LEDs that are sealed in epoxy resin for vibration resistance and…
LED spot light with 19 diodes
Our LED spot lights are 4" diameter. The spot lights with housing are 5" diameter and only 2-1/2" thick. They are a pedestal mount with a swivel bracket. All hardware, bracket and studs are…
Surface mount 4" round tail lights
LED 10 diode lights come in Red or Amber. Each light comes with the snap on chrome bezel. Red is a Stop/Tail/Turn signal light and the Amber light has a High/ low function too. Amber can…
15-inch identification lamps, available in Red or Amber LEDs
Each lamp is sealed with reflex built into the lens. 9 LEDs per light. 2" wide and 14-3/16 mounting hole centers.
Low Profile 1" wide x 15" Identification lamps
Amber low profile LED light has 2 wires and has new Lumi-Flect technology lens. Red low profile LED light has 3 wires and can be used for I.D. light and auxiliary high mount stop…
Circuit board to convert your LED lights into strobes!
Simply hook up 12v to this rubber coated circuit board and then hook to a switch. Hook your LED tail lights or auxilliary lights up to the strobe circuit board and your LED…
LED strip light with "split" turn signals
This LED light strip has the tail light function (all 10 LEDs) and the Brake function (all 10 LEDs) and also has right and left turn signal but they split in the middle of the bar. 5 LEDs on…
Narrow LED marker light
Available in Red or Amber. Dimensions: 4" L x 7/8" W x 1-3/16" H. 2-wire pigtail built in. SAE P2 01 DOT. 6-LEDs per light, 4" mounting hole centers. This is a surface…
LED oval Backup light
This 10-diode LED backup light comes with the rubber grommet and plug. We are running a special deal right now for only 17.95 each!!!!!! This 6.5" light gives off a kind of bluish white light, click…
Surface mount 6.5" oval LED lights
We have the Red 10-diode LED light with Stop/Tail/ Turn function & the Amber 10-diode LED with turn signal function. Available with or without chrome snap on bezel. No Plugs needed, built…
Sequential turn signal LED light
LED ARROW light will sequence 2 different ways (see videos below). You can have a single arrow going across lens or a trailing arrow going across lens. Very bright Amber LEDs. This light…
Red 7" BUS light
LED light has 17 Bright diodes and has reflex built into the center of the lens. DOT and SAE compliant. comes with foam gasket and 3 wire pigtail. Amber light and Red light have a High and low, so the red…
LED 2-1/2" marker light
These standard 2.5" lights come totally clear so you can't tell what color the light is until it is turned on. Each light has 13 bright colored LEDs. Available in Red or Amber. Uses a standard 2…
Round and Oval chrome covers
We offer the 2 standard sizes in chrome bezels for tail lights, the 4" round and the 6.5" oval. Each bezel has screws that attach bezel to the rubber grommet of your tail light.
Light housing with bracket
This rubber housing is the standard issue housing for most PAR36 lights. You can use all standard 4" lights in this housing including 4" tail lights, 4" turn signal lights and 4" spot lights. Our 4"…
These 24 watt LED flood lights are one of our higher powered LED work lights. Operating voltage is 10-30V DC. This light has eight high powered three-watt diodes with a color temperature of 6,500K. The current draw is just under 2A at 12v and…
Round 24-watt LED work/flood light
ON Sale through February 2012...price is 10% less
One of our highest power LED work lights yet! Operating voltage is 10-30V DC. This light has 8 high powered 3-watt diodes with a color…
LED single stud pedestal light
This Square face LED light is 4-5/8"x 4-5/8". Single stud for fender or bumper applications. 25 bright Amber LED diodes per side and 2 side marker LEDs. Chrome finish around the whole…
12-volt replacement for 3157 tail light bulb
This LED bulb replaces your existing 3157 bulb. If you use a 3157 tail light/ turn signal/ brake light bulb then you can use this. Very bright with 18 light emitting diodes. …
